SE5007BT

5 GHz Front End Module with Power Detector


The SE5007BT is a 5GHz front end module offering high linear power for wireless LAN applications. It incorporates a power detector for control of the output power.

The SE5007BT offers a high level of integration for a simplified design, providing quicker time to market and higher application board production yield. The device integrates the input balun, the inter-stage match, a temperature compensated, load insensitive power detector with 20dB of dynamic range, a 3.8GHz notch filter, a T/R switch and an Rx LNA.

For wireless LAN applications, the device meets the requirements of IEEE802.11a and delivers approximately 17dBm of linear output power. It also features a low linearity mode control to reduce current consumption at low power modes.

The SE5007BT integrates the reference voltage generator, allowing for a true 1.8V CMOS compatible digital EN (enable) function to turn the power amplifier on and off.

Specifications

Frequency (GHz) Min.4.9
Frequency (GHz) Max.5.85
802.11 WLAN Standarda/g/n
Antenna Ports1
Architecture5 GHz Front End Module
with Power Detector
195
Typ. POUT @ 3.0% EVM (dBm)17
Typ. Current @ VCC = 5 V (mA)
Typ. Tx Gain (dB)31
VCC (V)
PackageQFN, 16-pin
Package (mm)3 x 3 x 0.9

Features

  • 5GHz Front End Module with PA, LNA and T/R Switch
  • Integrated power amplifier enable pin (VEN)
  • Buffered, temperature compensated power detector
  • High and Low-Linearity mode
  • 3% EVM, @17dBm, 64 QAM, 54 Mbps
  • 30 dB Typical Gain
  • Lead Free and RoHS compliant, halogen free package
  • 16 pin 3 mm x 3 mm x 0.6 mm QFN, MSL1

Product Documents