SKY77824-11
SkyLiTE™ Power Amplifier Module for FDD LTE Bands 7 and 30, TDD LTE Bands 38/41 and 40, and AXGP Band

SkyLiTE™ is Skyworks’ newest family of LTE devices which consists of highly integrated modules incorporating the amplification, switching, WiFi filtering and coupler functions required to support all major FDD/TDD bands. With the addition of external duplexers, this product family provides OEMs with a scalable and reconfigurable front-end system suitable for markets worldwide.

SKY77824-11 SkyLiTE™ Power Amplifier Module (PAM) is a fully matched, 28-pad surface mount (SMT) module developed for LTE applications. The module includes broadband coverage of FDD LTE Bands 7 and 30, TDD LTE Bands 38/40, and Band 41 in a compact 4.0 x 3.65 mm package and is fully programmable through a Mobile Industry Processor Interface (MIPI®). Attaining high efficiencies throughout the entire power range while meeting the stringent linearity requirements of LTE, the SKY77824-11 delivers unsurpassed savings in current consumption for data-intensive applications.

The Gallium Arsenide (GaAs) Microwave Monolithic Integrated Circuit (MMIC) contains all amplifier active circuitry, including input, interstage, and output matching circuits. Output match into a 50-ohm load is realized off-chip within the module package to optimize efficiency and power performance. A Silicon-on-insulator (SOI) switch follows the wideband power amplifier to direct the RF output signal to either a band 7 duplexer or one of three TDD filters supporting bands 38, 40, and 41. Additional throws in the SOI switch allow the reuse of TDD filters in Rx mode by providing paths to either the band 40 Rx port (T/R1) or a shared band 38/41/7 Rx port (T/R2). Bias for the PA MMIC and switch is generated on a CMOS IC controlled through a MIPI RFFE interface.

The SKY77824-11 SkyLiTE™ is manufactured with Skyworks' InGaP GaAs Heterojunction Bipolar Transistor (HBT) process which provides for all positive voltage DC supply operation and maintains high efficiency and good linearity. Optimal performance is obtained with VCC1 and VCC2 sourced from a DC-DC power supply based on target output power. No external supply side switch is required as typical "off" leakage is a few microamperes.

Features

  • Optimized for Average Power Tracking (APT)
  • High efficiency Broadband 2.3 GHz to 2.69 GHz
  • MIPI® RFFE interface
  • Integrated output switch including TDD Tx/Rx function for single SAW architecture
  • RF I/O internally matched to 50 ohms
  • Small, low profile package: 4.0 x 3.65 x 0.8 mm Max, 28-pad configuration
Product Summary SKY77824-11 SkyLiTE™ Power Amplifier Module for FDD LTE Bands 7 and 30, TDD LTE Bands 38/41 and 40, and AXGP Band SKY77824_11_203395C.pdf (91 KB)
ProductName : SKY77824-11
Frequency (MHz) :
Description : SkyLiTE™ PAM for LTE FDD Band 7, Band 30, LTE TDD BandS 38/41 , Band 40, and AXGP Band
LTE B7
LTE B30
LTE B38/41
LTE B40
AXGP Band
Typical PAE (%) : TBD
Typical Imax (mA) : TBD
Typical Linear LTE Power
(dBm) :
Typical Gain (dB) : TBD
Supply Voltage (V) : TBD
Package : MCM, 28-pad
Package (mm) : 4.0 x 3.65 x 0.8 Max.
Product Information:
For world-class customer service and assistance finding the Skyworks product to fit your specific design needs, please submit your request, or contact us by phone.
USA: 781-376-3000
Asia: +886 2 2322 0200
Europe: +33(0) 1 43548540