SKY77633-11

Multimode Multiband Power Amplifier Module for Quad-Band GSM/EDGE – Hepta-Band (I, II, III, IV, V, VIII, XX) WCDMA / HSDPA / HSUPA / HSPA+ / LTE

The SKY77633 is a hybrid, multimode multiband (MMMB) Power Amplifier Module (PAM) that supports 2.5G and 3G/4G handsets and operates efficiently in GSM, EGPRS, EDGE, WCDMA, and LTE modes. The PAM consists of a GSM 800/EGSM 900 PA block, a DCS1800/PCS1900 PA block, separate WCDMA blocks operating in low and high bands, a logic control block for multiple power control levels, and band enable functions in both cellular and UMTS. RF I/O ports are internally matched to 50 to minimize the number of external components. Extremely low leakage current maximizes handset standby time. The InGaP/GaAs die and passive components are mounted on a multi-layer laminate substrate and the assembly encapsulated in plastic overmold.

GSM/ EDGE: The SKY77633 uses a new compact architecture supporting the GSM850, EGSM900, DCS1800 and PCS1900 bands. The PAM also supports 2.5G Class 12 Enhanced General Packet Radio Service (EGPRS) multi-slot operation and EDGE linear modulation.

WCDMA: The SKY77633 uses an enhanced architecture to: support WCDMA, High-Speed Downlink Packet Access (HSDPA), High-Speed Uplink Packet Access (HSUPA), and LTE modulations; cover multiple bands for 3GPP, including bands I, II, IV, V, and VIII; operate at different power modes. The module is fully controllable via MIPI interface.

LTE: The SKY77633 meets spectral linearity requirements of LTE modulation with QPSK/16QAM up to 20 MHz bandwidth, including various resource block allocations, with good power-added efficiency.

Product Summary

Talk to Sales ECAD Model

Specifications

Frequency (MHz)

DescriptionMMMB PAM for
for Quad-Band GSM/EDGE – Hepta-Band (I, II, III, IV, V, VIII, XX)
WCDMA / HSDPA / HSUPA / HSPA+ / LTE

Typical PAE (%)TBD

Typical Imax (mA)TBD

Typical Gain (dB)TBD

Supply Voltage (V)TBD

PackageMCM, 42-pad

Package (mm)7 x 5 x 0.9

Features

Hybrid architecture: separate GSM, WCDMA paths
50 ohm input and output impedances, integrated DC blocking on all ports
Separate single-ended GSM and WCDMA inputs and outputs
CMOS-compatible, two-wire MIPI logic inputs (SCLK, SDATA)
VCC stages for 2.5G can attach to battery or buck DC/DC
Low capacitance VCC interface for 3G/4G supports Envelope Tracking compatibility
Small, low profile package: 7 mm x 5 mm x 0.9 mm, 42-pad configuration
2.5G FEATURES:
- EGPRS Class 12 multi-slot operation
- Four RF POUT control levels using RFFE interface
- Linear PA with bias optimization for efficiency/linearity tradeoff in 8-PSK mode
3G FEATURES:
- WCDMA mode supports output power, bandwidth for bands I, II, III, IV, V, VIII (and sub-bands IX, X, XVIII, IXX, XXVI) through an integrated band-select switch
- Digital bias optimization through RFFE interface for best efficiency/linearity tradeoff
- Compatible with Envelope Tracking System

Find Your Sales Representative and Distributor
Consult with your Skyworks sales representative or distributor to find the best solution for your design.

Request a Quote
Get a quote for the specific products and quantities you need.

Working with Skyworks
Learn more about our purchase process to navigate quickly and efficiently

Support and Resources
Explore Skyworks support options, consult with our global sales and channel partners, and get the resources and expert guidance and custom development services you need to help you with your next innovation.

Technical Documents
Explore application notes, block diagrams, data sheets, user guides, ADS model calculators, installation references, S parameters and more.

Product Lifecycle Status Lookup
Lookup the product lifecycle status of Skyworks part number

Certificate of Conformance
Look up a product’s Certificate of Conformance for information such as REACH, RoHS, IEC 624741 and more.

之前访问过的产品

新产品和特色产品

以前访问过的应用程序

新应用程序和特色应用程序