SKY77368-11

Power Amplifier Module for Quad-Band GSM / GPRS / EDGE / TD-SCDMA / TDD LTE / HD-FDD LTE

The SKY77368-11 power amplifier module (PAM) is designed for LTE M/NB-IoT modules supporting fixed gain Gaussian Minimum-Shift Keying (GMSK), fixed gain linear Enhanced Data for GSM Evolution (EDGE) modulation in the GSM850/900 and DCS1800/PCS1900 bands, and TD-SCDMA modulation in Bands 34 and 39. Class12 General Packet Radio Service (GPRS) multi-slot operation is also supported.

The compact 3.0 mm x 3.0 mm x 0.67 mm (Max) module consists of GSM850/900 and DCS1800/PCS1900/B34/B39 power amplifier blocks, 50-ohm input and output matching circuitry, and a multi-function power amplifier control (MFC) block. The custom silicon CMOS MFC provides PA bias and product identification read-back capability and is fully programmable through the RF Front-End Mobile Industry Processor Interface (RFFE MIPI®).

The heterojunction bipolar transistor (HBT) power amplifier blocks are fabricated onto a single lnGaP die; one supports the GSM850/900 bands and the other supports the DCS1800/PCS1900/ B34/B39 bands. Both PA blocks share two common power supply pads. The InGaP die, silicon die, and the passive components are mounted on a multi-layer laminate substrate. The entire assembly is encapsulated with plastic over-mold.

Features

  • Single device for Half-duplex LTE + 2G operation
  • High efficiency in GSM mode
  • Programmable bias for improved backed-off efficiency
  • High linearity
  • Low standby leakage
  • Direct battery connection
  • Programmable current clamp
  • Autonomous Over-Voltage Protection
  • Small, low profile package: 3.0 x 3.0 x 0.67 mm Max., 12-pad configuration

Images & Diagrams

Specifications

    • Power Amplifier Module for Quad-Band GSM / GPRS / EDGE / TD-SCDMA / TDD LTE / HD-FDD LTE
    • MCM, 12-pad
    • 3.0 x 3.0 x 0.67

Applications